MECHANIC MOTOR VEHICLE 1st year WEEK WISE NSQF SYLLABUS (SPILT UP)

WEEK. NO. 23

  1. Reference Learning Outcome :-Overhaul Engine and check functionality. (Mapped NOS: ASC/N1405)
  2. Duration :- Professional Skill 175 Hrs.; Professional Knowledge 32 Hrs.(for above learning out come)
TRADE THEORY (Professional Knowledge ) :- 
    • Description and function of the fly wheel and vibration damper.
    • Crank case & oil pump, gears timing mark, Chain sprockets, chain tensioner etc.
TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical
  • 49. Perform Checking of flywheel and mounting flanges, spigot, bearing. (10 Hrs)
  • 50. Check vibration damper for defects, Practice on removing cam shaft from engine block, Check for bend & twist of camshaft. (10 Hrs)

WEEK. NO. 24 

  1. Reference Learning Outcome :-Overhaul Engine and check functionality. (Mapped NOS: ASC/N1405)
  2. Duration :- Professional Skill 175 Hrs.; Professional Knowledge 32 Hrs.(for above learning out come)
TRADE THEORY (Professional Knowledge ) :- 
    • Function of clutch & coupling units attached to flywheel.
TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical
  • 51. Perform Inspection of cam lobe, camshaft journals and bearings and measure cam lobe lift. (10 Hrs)
  • 52. Practice Fixing bearing inserts in cylinder block & cap check nip and spread clearance & oil holes & locating lugs fix crank shaft on block-torque bolts – check end play remove shaft – check seating, repeat similarly for connecting rod and Check seating and refit. (15 Hrs)

WEEK. NO. 25

  1. Reference Learning Outcome :-Overhaul Engine and check functionality. (Mapped NOS: ASC/N1405)
  2. Duration :- Professional Skill 175 Hrs.; Professional Knowledge 32 Hrs.(for above learning out come)
TRADE THEORY (Professional Knowledge ) :- 
    • Description of Cylinder block, Cylinder block construction, and Different type of Cylinder sleeves (liner).
TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical
  • 53. Practice Cleaning and Checking of cylinder blocks. (10 Hrs)
  • 54. Check cylinder blocks Surface flatness visually. (05 Hrs)
  • 55. Measure cylinder bore for taper & ovality, clean oil gallery passage and oil pipe line, Bore – descale water passages. (10 Hrs)
error: Content is protected !!
Scroll to Top