MECHANIC DIESEL 1st year WEEK WISE NSQF SYLLABUS (SPILT UP)

WEEK. NO.   09  

1. Reference Learning Outcome :- Plan & perform basic fastening & fitting operation by using correct hand tools, Machine tools & equipments. (Mapped NOS: CSC/N0304)
2. Duration :- Professional Skill 90  Hrs; Professional Knowledge 17  Hrs  (for above learning out come)

TRADE THEORY (Professional Knowledge ) :- 

• • Drilling machine
  • Description and study of Bench type Drilling machine,
  • Portable electrical Drilling machine,
  • drill holding devices,
  • Work Holding devices,
  • Drill bits.
  • Taps and Dies
  • Hand Taps and wrenches,
  • Calculation of Tap drill sizes for metric and inch taps.
  • Different type of Die and Die stock. Screwextractors.

TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

• 21. Perform practice on Marking and Drilling clear and Blind Holes, Sharpening of Twist Drills Safety precautions to be observed while using a drilling machine. (10hrs)
  22. Perform practice on Tapping a Clear and Blind Hole, Selection of tape drill Size, use of Lubrication, Use of stud extractor. (15 hrs)

WEEK. NO. 10

1. Reference Learning Outcome :- Plan & perform basic fastening & fitting operation by using correct hand tools, Machine tools & equipments. (Mapped NOS: CSC/N0304)
2. Duration :- Professional Skill 90  Hrs; Professional Knowledge 17  Hrs  (for above learning out come)

TRADE THEORY (Professional Knowledge ) :- 

• • – Hand Reamers
  • Different Type of hand reamers,
  • Drill size for reaming,
  • Lapping, Lapping abrasives, type of Laps.

TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

• 23. Perform practice cutting Threads on a Bolt/ Stud. Adjustment of two piece Die, Reaming a hole/ Bush to suit the given pin/ shaft, scraping a given machined surface.

WEEK. NO. 11 & 12

1. Reference Learning Outcome :- Trace and Test all Electrical & Electronic components & circuits and assemble circuit to ensure functionality of system. (Mapped NOS: ELE/N9412)
2. Duration :- Professional Skill 92 Hrs; Professional Knowledge 14  Hrs  (for above learning out come)

TRADE THEORY (Professional Knowledge ) :- 

• • Basicelectricity
  • – Electricity principles,
  • – Ground connections,
  • – Ohm’s law,
  • – Voltage, Current, Resistance, Power, Energy.
  • – Voltmeter, ammeter, Ohmmeter, Multimeter,
  • – Conductors & insulators, Wires, Shielding, Length vs.
  • resistance, Resistor ratings

TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

• 24. Perform practice in joining wires using soldering Iron. (20 hrs)
• 25. Prepare simple electrical circuits, measuring of current, voltage and resistance using digital multimeter. (20 hrs)
• 26. Perform practice continuity test for fuses, relay and diodes (09hrs)

WEEK. NO. 13 & 14

1. Reference Learning Outcome :- Trace and Test all Electrical & Electronic components & circuits and assemble circuit to ensure functionality of system. (Mapped NOS: ELE/N9412)
2. Duration :- Professional Skill 92 Hrs; Professional Knowledge 14  Hrs  (for above learning out come)

TRADE THEORY (Professional Knowledge ) :- 

• • – Fuses& circuit breakers,
  • – Ballast resistor,
  • – Stripping wire insulation,
  • – Cable colour codes and sizes, Resistors in Series circuits,
  • – Parallel circuits and Series- parallel circuits
  • – Description of Chemical effects, Batteries & cells, Lead acid batteries & Stay Maintenance Free (SMF) batteries,
  • – Magnetic effects, Heating effects, Thermo-electric energy, Thermistors, Thermo couples,
  • – Electrochemical energy, Photo-voltaic energy, Piezo- electric energy, Electromagnetic induction,
  • – Relays, Solenoids, Primary & Secondary windings, Transformers, stator and rotor coils.

TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

• 27. Check circuit using of service manual wiring diagram fortroubleshooting (08 hrs
• 28. Execute cleaning and topping up of a lead acid battery. (10 hrs)
• 29. Perform testing battery with hydrometer. (12 hrs)
• 30. Perform connecting battery to a charger for battery charging and checking & testing a battery after charging. (08 hrs)
• 31. Perform test of relay and solenoids and its circuit. (05 Hrs)

WEEK. NO. 15   & 16

1. Reference Learning Outcome :- Trace & Test Hydraulic and Pneumatic components. (Mapped NOS: CSC/N0304)
2. Duration :- Professional Skill 35 Hrs; Professional Knowledge 09  Hrs  (for above learning out come)

TRADE THEORY (Professional Knowledge ) :- 

• • Introduction to Hydraulics &Pneumatics
  • – Description,symbols and application in automobile of Gear pump-Internal & External, single acting, double acting & Double ended cylinder;
  • Directional control,
  • Pressure relief valve,
  • Non return valve,
  • Flow control valve used in automobile.

TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

• 32. Identify of Hydraulic and pneumatic components used in vehicle. (10 hrs)
• 33. Tracing of hydraulic circuit on hydraulic jack, hydraulic, and Brake circuit. (15hrs)
• 34. Identify components in Air brake systems (10hrs)