DRAUGHTSMAN CIVIL 2nd YEAR WEEK WISE NSQF SYLLABUS (SPILT UP)

WEEK. NO. 24

1. 1. Reference Learning Outcome :- Draw the typical cross section of rail sections, railway tracks in cutting and embankment using CAD. (Mapped NOS: IES /N9432)
   2. Duration :- Professional Skill 56 Hrs.; Professional Knowledge 16  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • • Railways :-
     •  Joints-types, fish plate, fish bolt-spikes, chairs and keys-bearing plate, block elastic, base plate.
     •  Anchors and anti-creepers.
     •  Construction of permanent ways.
     •  Railway station and yard.

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • Railway:-
   • 152. Draw typical cross-section of railway tracks cutting & embankment (single lane & double lane). (22hrs)
   • 153. Draw layout of signalling points & crossing. (06 hrs)

WEEK. NO. 25  & 26

1. 1. Reference Learning Outcome :- Prepare detailed drawing of typical cross sections of Dam, barrages, weir and Cross drainage works using CAD. (Mapped NOS: IES /N9433) Draw the schematic diagram of different structures of Hydro electric project using CAD. (Mapped NOS: IES /N9434)
   2. Duration :- Professional Skill 56 Hrs.; Professional Knowledge 16  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • • Irrigation Engineering:-
     •  Terms used in irrigation.
     •  Hydrology like duty, delta, base period, intensity of irrigation.
     •  Hydrograph, peak flow, run off, catchment area, CCA, corps like, rabi, kharifetc.
     •  Storage, diversion head work -characteristics and types.
     •  Reservoir –types of reservoirs, i.e., single purpose and multi-purpose, area, capacity and curves of reservoir.
     •  Dams, weir & barrages- types purposes.
     •  Hydro electric project like Forebay, Penstock, Turbines, Power house, etc.
     •  Canals- classification and distribution system, canal structures.
     •  Types of cross drainage works like Aquaduct, Super passage, Syphon, Level crossing, inlet and outlet, etc.

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • Drawing of different types of irrigation structures: –
   • 154. Dams, barrages, weir etc. (9hrs)
   • 155. Longitudinal section of distributaries with the help of given sketch & data. (9hrs)
   • 156. Head regulators. (8hrs)
   • 157. Types of cross drainage work. (9 hrs.)
   • 158. Hydro electric project. (9hrs)
     Drawing of canal
   • 159. Alignment including longitudinal and cross sections of canals with the given data. (12 hrs)

WEEK. NO. 27, 28 & 29 

1. 1. Reference Learning Outcome :- Prepare detailed estimate and cost analysis of different types of building and other structures using application software. (Mapped NOS: IES /N9435) Prepare rate analysis of different items of work. (Mapped NOS: IES /N9436) Problems on preparing preliminary/Approximate estimates for building project. (Mapped NOS: IES /N9437)
   2. Duration :- Professional Skill 84 Hrs.; Professional Knowledge 32  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • • Estimating and Costing :-
     •  Introduction.
     •  Purpose and common techniques.
     •  Drawing of construction.
     •  Measurement techniques.
     •  Estimate-necessity, importance, types-approximate and detailed estimate-main and sub estimates, revised, supplementary, maintenance / repair estimate-taking off quantities- method
     •  Rate analysis of typical items and their specifications.
     •  Labour and materials.
     •  Govt. Schedule of rate.
     •  Estimating of irregular boundaries by trapezoidal

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • Estimating and Costing:-(visualizing the plotted drawing)
   • 160. Prepare detailed Estimate :-Calculate quantities of items of single storied and double storied building. (12 hrs.)
   • 161. Prepare abstract of estimate by prevailing rates. (10 hrs.)
   • 162. Prepare rate analysis of major items – RCC, PCC, Wood works, Stone & Brick masonry & Plastering. (16hrs)
   • 163. Solve problems on preparation ofpreliminary / approximate estimates for building projects by Excel worksheet as per Govt. schedule. (16hrs)
   • 164. Familiarisationwith and making estimation with software. (18 hrs)
   • 165. Estimate earthwork of irregular boundaries. (12 hrs)

WEEK. NO. 30

1. 1. Reference Learning Outcome :- Prepare a map using Total station. (Mapped NOS: IES /N9438)
   2. Duration :- Professional Skill 56 Hrs.; Professional Knowledge 16  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • • Total Station:- –
     •  Introduction.
     •  Components parts, accessories used.
     •  characteristics, features.
     •  advantages and disadvantages.
     •  principle of EMD.

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • Total Station:-
   • 166. Application of survey using TS. (06hrs)
   • 167. Field procedure for co-ordinate measurement. (06hrs)
   • 168. field procedure to run open traverse and closed traverse. (04hrs)
   • 169. Transfer or establish Bench Mark. (03hrs)
   • 170. Perform stakeout / demarcation of building layout /plot layout/ roads/ alignment. (08 hrs.)

WEEK. NO. 31

1. 1. Reference Learning Outcome :- Prepare a map using Total station. (Mapped NOS: IES /N9438)
   2. Duration :- Professional Skill 56 Hrs.; Professional Knowledge 16  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • •  Working and need.
     •  Setting and measurement.
     •  Electronic, display & Data reading.
     •  Rectangular and polar co-ordinate system.
     •  Terminology of open and closed traverse.

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • 171. Measure remote distance and elevation. (10 hrs)
   • 172. Calculate surface area on field/site. (03hrs)
   • 173. Calculate volume of field/site. (03hrs)
   • 174. Procedure for down load and up load data. (06 hrs)
   • 175. Simple survey map using Auto CAD. (07hrs)

WEEK. NO. 32

1. 1. Reference Learning Outcome :- Locate the station point using GPS and obtain a set of co-ordinates. (Mapped NOS: IES /N9439)
   2. Duration :- Professional Skill 28 Hrs.; Professional Knowledge 08  Hrs. (for above learning out come)

   TRADE THEORY (Professional Knowledge ) :- 

   • • GPS (Global Positioning System):-
     •  Introduction of GPS system.
     •  Co- ordinate and time system.
     •  Satellite and conversional geodetic system.
     •  GPS. Signal, code, and biases
     •  Role of TRANSIT in GPS development.
     •  GPS segment organisation.
     •  GPS survey methods. Basic geodetic co-ordinate.
     •  Ground support equipment, signals.
     •  Tracking devises& system.
     •  Time measurement and GPS timing.

   TRADE PRACTICAL (Professional Skills  With Indicative Hours) :- Job no. & Name of the Practical

   • GPS Awareness:-
   • 176. Practical application of GPSComponents of GPS data processing.GPS signal. 9hrs
   • 177. Code and biasesTechniques of GPS observing. 4hrs
   • 178. Set up and use GPS equipment. – (9 hrs)
   • 179. Compare with GPS, GIS,GNSS& CAD. (06hrs)